Multimedia teaching all-in-one machines are now widely used in educational places, and various problems may occur during use. As a manufacturer of multimedia teaching all-in-one machine, Suosu is also to let the majority of users know some problems of multimedia teaching all-in-one machine in daily use, and know how to deal with and solve them more quickly.
one. The touch is inaccurate or insensitive during the use of the multimedia teaching all-in-one machine.
1. It may be that there are water droplets on the touch screen or the border of the touch screen is covered by dust. This can be cleared
2. If there is a slight deviation in the corners of the touch, you can open the Start Menu - Control Panel - Hardware and Sound. There is a computer with its own correction, click to correct it.
3. If the above cannot be solved, you need to contact the manufacturer to provide touch correction software, and perform a correction test to see the specific situation.
two. The screen is unresponsive, and the buttons are useless.
1. The motherboard of the computer may crash, you need to press the power switch to shut down and restart.
2. During use, the keys are frequently pressed, so that the teaching all-in-one system triggers the child lock function, which requires the child lock password to unlock.
three. The multimedia teaching all-in-one machine is normally turned on and does not enter the computer system.
1. Did you repeatedly press the pc switch key?
2. Check if the computer box is lit, if not, press the switch on the box. If the light is on, you need to see if the main board is started. If the signal is not switched on, the machine will restart directly. If it does not start, it is possible that the motherboard is damaged and directly contact the manufacturer for repair.
