1. The LCD splicing screen can generate wall test signals for unit adjustment.
2. The system is easy to expand. The large-screen splicing multi-screen controller supports up to 256 RGB outputs and can drive 256 units.
3. Application systems such as the control center can be clearly displayed on the LCD splicing screen without affecting the normal use of the user system. The software splicing system can ensure the superimposition of the resolution, so that the graphics that cannot be displayed on the small screen are clearly displayed on the whole screen.
4. Full hardware architecture, no operating system, no risk of virus infection, and good security.
5. The start-up time is extremely fast, less than 5 seconds.
Sixth, the output of the graphics card is an RGB signal, and up to 48 outputs can be configured. Support multi-channel video input, up to 128 channels, compatible with signal sources.
Seven, the video window can be zoomed arbitrarily, full-screen roaming, support PAL/NTSC/SECAM, automatically identify and track changes in the system.
8. The operation interface is intuitive and easy to use. The call and control of graphic signals has nothing to do with the user's application program to ensure the safety of the user system.
9. The system has a secondary development function, which can be developed on the basis of the controller and the original software code according to the specific requirements of the user.
10. The splicing system is reliable and safe, and has the ability to work 724 hours. Ensure the stability of the system. It can be equipped with dual power supplies, fans, and can be hot-replaced.
11. The output display format is XGA or SXGA, which directly drives the LCD splicing unit.
12. Divide a channel of video VGA signal into MN combination effects.
13. The picture and function of each large-screen display should be arbitrarily defined, and the large-screen display has a short response time to call up the picture.
14. Automatic adjustment of brightness, contrast, chroma and smoothness of image parameters.
15. Support remote multi-user operation: users can operate the large screen with a single mouse or multiple mice and keyboards through the local area network to realize the splicing of the large screen. Multiple operators can use the mouse and keyboard of their respective desktops to interactively operate the large screen on the large screen. Open or close the video and RGB windows, change the position and size of the windows, etc.
16. The user can open multiple active windows at any position on the screen. All windows should be able to move arbitrarily, zoom in or zoom out, and ensure that the details of the screen are not lost when the screen is zoomed, zoomed, or moved, such as characters without missing strokes, etc. LCD splicing screen
