How to prevent static electricity on LCD:
1. Do not touch the outer leads, the circuit on the circuit board and the metal frame with your hands;
LCD
2. If direct contact is necessary, the human body and the module should be kept at the same potential, or the human body should be well grounded;
3, the soldering iron used for welding and the power tools used for operation must be well grounded and there is no leakage;
4. Do not use a vacuum cleaner for cleaning, because it will generate strong static electricity;
5. Dry air will also generate static electricity. Therefore, the humidity in the working room should be above RH60 percent ;
6. When taking out or putting it back in the packaging bag or moving position, also need to be careful to prevent static electricity. Do not change the packaging or discard the original packaging at will.
