Due to the needs of normal manufacturing, the industrial control system of some factories takes a long time to work, which brings great training to the industrial computer control system. According to Microsoft's operating system operating time report, Microsoft claims that its operating system after Windows 2000 can support long-term work, but from the actual operation, after the operating time spans over a week, the disk will accumulate in the process of huge data exchange. Accumulation of a large number of data fragments can easily lead to disk logical bad sectors, read and write failures, and slow system operation and startup. Therefore, the industrial computer can restart the industrial computer and defragment the disk on time when the manufacturing allows it to reduce disk failures caused by long-term events. The restart time can be determined according to the amount of data processed by the industrial computer and the manufacturing situation. It is not rigid and needs to be tested gradually. From the actual experience of Yanshuo Electronics, restarting and rectifying the industrial computer once a standard month (30 days) can reduce the probability of disk failure.
La protection matérielle de l'ordinateur industriel est manquante
The hardware of the industrial computer mainly includes hard disks, optical drives, etc. When using the industrial computer, we should pay attention to the protection of its hardware. Below, Yanshuo Electronics will explain to you that the hardware protection of the industrial computer is missing: the first is the protection of the hard disk of the industrial computer. When using industrial personal computers in general, do not damage the hard disk casually to avoid vibration and extrusion. Although do not turn off the power of the computer when the hard disk is running, such a sudden shutdown will cause the hard disk track to be damaged and data to be lost. Do not touch the jumper assembly on the hard disk casually. When handling, it is necessary to use anti-static plastic bags or use anti-shock materials such as sponges to keep good, and often check for viruses to prevent corrosion. When there is an energy-saving effect in the operating system, it should be used reasonably to extend the service life of the hard disk. Secondly It is the protection of the optical drive. Do not open the door of the optical drive casually during use. It is not possible to use damaged or pirated discs to prevent dust from entering the optical drive. The optical drive should not be touched, twisted, or beaten during use. Disk reading is fine.
The reason for the slow feedback of the touch screen in the industrial computer industry
The touch screen in the industrial computer industry has been used for a long time, and it is inevitable to find that the feedback is slow. If the touch screen feedback is very slow, the touch screen system may be outdated, and the clock frequency inside is too low, probably because the surface of the touch screen has water droplets moving. The touch screen recovers quickly, and it is necessary to renew or upgrade the system, or use a rag to dry the water droplets on the surface of the touch screen. Generally, such a situation may be more common for multi-touch screens, but it is good to pay attention to maintenance. The above are the most important 4 points that need to be paid attention to in the application of the touch screen self-service interrogation machine in the industrial computer industry, but in the detailed operation application, the following additional 9 points must be paid attention to: TP is a glass finished product, please take care Take it lightly to avoid breaking.
The touch surface of the industrial computer TP is made of conductive film. If the protective film is torn off, please do not press the surface of the product with nails, pencils, ballpoint pens or other sharp objects, so as to avoid soiling and scratching the product. Please do not stick oil, water and other liquids on the surface of the product. When there are stains on the surface of the TP, please use a absorbent cotton ball or a dust-free cloth to lightly touch the alcohol, and gently wipe the surface of the product, and do not penetrate the alcohol into the product. Please avoid the application and retention of the industrial computer in the presence of organic solvents or corrosive gases (acid gases, etc.). When installing the machine, please choose the glue that is not corrosive to the product. When installing the machine, please take the product with finger cots or gloves to ensure the cleanliness of the product. When the TP is found to be ineffective, please check whether there is soldering, whether the pins are in good contact, whether the installation is good, whether the operation is in the position of touch. If there is no such problem, please put the protective film back on the surface of the product to ensure that the product is fully returned to the factory Describe the punishment. After unpacking and sampling inspection, please keep the original packaging and sealed storage, so that the product is not affected by high temperature and high humidity, resulting in watermarks on the glass surface of the product.
